• 3700 Lbs.
• 123” Wheel base.
• 92” Track width.
• 5 speed. 8 cyl. 730 hp.
• SCORE, BITD and Aussie legal.

• 427 LS7 Dry sump performance engine
• Albins 5 speed seq.
• Albins torque converter
• Albins billet shifter and cable
• Trans pump and filter
• Trans oil cooler
• Class 1 chassis 2 seat TIG welded 4130 chromoly tubing
• 4130 box plate bulk heads
• 4130 box plate TIG welded a-arms
• Billet class 1 spindle
• 300M pin and bushings w/ 2” heat treated spindle snout
• 2” hollow front hub w/ 6 piston caliper and 14x1” vented rotors
• HOWE Trophy Truck 3.0 rack and pinion
• Truggy Sweet servo
• HOWE chromoly tie rod spreader
• HOWE Truggy power steering reservoir w/ filter
• HOWE 1600 PSI truck pump
• Billet power steering pump mount and pulley w/ hub
• 300M machines tie rods
• MOMO steering wheel w/ sweet disconnect
• FK rod ends and spherical bearings w/ stainless steel hi-mis alignment spacers
• 934 box plate rear trailing arm – TIG welded
• 934 midboard hubs w/ 6 piston calipers and 14x1” vented rotors
• 934 300M gun drilled 35 spline axles
• 934 CVs 35 spline and 300M cages – race prepped
• 934 Boots and flanges
• (2) King 3.5 x 14” 5 tube bypass front
• (2) King 2.5 x 10” coil over remote
• (2) King 4.0 x 16” 6 tube bypass rear
• (2) King 2.5 x 14” coil over remote
• (8) EIBACH springs
• 220 PSI aircraft hardware for all suspension, shocks and steering
• (2) High containment racing seats
• (2) CROW 5 point bolt-in belts with sewn in pads
• Custom molded composite body
• Custom molded composite dash
• Full floor 6061-T6
• Full sub floor
• Full skid plate under engine and transmission 6061-T6
• PRW radiator w/ built in cooler
• 2 Spal 16” HP fans
• Custom screen radiator
• Side screens engine compartment
• 55 gal. Harmon fuel cell w/ 4” fuel fill
• Dual UMP air cleaners
• Rear sway bar system
• BFG 37 x 12.50 x 17 Project KR
• BTR 17” x 8 bead lock wheel
• CNC dual master large reservoir easy fill swing mount long pedals
• Fabricated gas pedal
• CNC turning brake
• Dead pedal
• Mastercraft window nets
• Mastercraft double limiter strap front & rear
• (2) Vision X 220 OP front lights
• (1) Vision X LED light bar
• LED tail lights w/ amber
• PCI Kenwood race radio w/ intercom
• (2) Push to talk
• (2) Parker pumper
• Lowrance HD 10” GPS
• Livorsi gauges – monster tach, water temp, oil pressure, fuel pressure, volt, oil temp and trans temp
• Custom wiring w/ circuit breakers
• Aluminum floor jack w/ quick release handle
• Breaker bar lug wrench
• Spare tire mount w/ ratchet strap
  
• Steel braided pluming 
  
• Dual Aeromotive A1000 fuel pumps
  
• Aeromotive -10AN 100 micron fuel filter
  
• Aeromotive -10AN 10 micron fuel filter
  
• Aeromotive EFI fuel pressure regulator w/ gauge
  
• (2) Fire extinguishers
  
• Passengers foot rest w/ oil holder
  
• 2 side mirrors
  
• Tool bag
  
• First Aid Kit
  
• Triangle Marker